Digitalni mjerač ravnosti kontaktne mreže s digitalnim prikazom
Contact Info
- Adresa:, Poštanski broj:
- Kontakt: 王先生
- Tel:18910132037
- Email:1322188373@qq.com
Ostali proizvodi
FTJP-3 digital display type catenary straightness measuring instrument
The digital display type catenary straightness measuring instrument can measure the straightness of the conductor, and it can measure by itself without manual reading.
Display data unit: mm
Current status: The current operating status of the equipment
A: Real-time level of the catenary
B: Real-time displacement of the catenary
C: Displacement variation of the catenary
Technical parameters
1) Measuring range: 1000mm
2) Measuring accuracy: Grade 0
3) Applicable range: Suitable for various types of contact wires
Measurement process
1. Place the catenary in the equipment's slot.
2. Turn on the equipment's power switch.
3. After the system starts, the current status is "Initializing".
4. Wait for the initialization to complete, and the prompt "Ready" will appear, at which point the measurement operation can be performed.
5. Press and hold the key for 3 seconds, the current status will change to "Start Measurement", and then enter the measurement mode to measure the catenary.
6. After the measurement is completed, press and hold the key for 3 seconds, the current status will change to "Measurement End".
Calibration process
1. Place the equipment on a horizontal surface.
2. Place a measuring block with a thickness of 1cm at the measuring position of the equipment.
3. Start the equipment.
4. In the initialization state, press and hold the key for 4 seconds, and the prompt "Calibration completed" will appear.
| Kategorija industrije: | Instruments & Meters/Measuring Instruments/Other Measuring Instruments |
|---|---|
| Kategorija proizvoda: | |
| Brend: | |
| Specifikacija: | |
| Zaliha: | |
| Porijeklo: |
